Features #
- This product is made by 2.4G wireless transmitting technology with low consumption and strong ability
- 5 kinds of output mode support 5 led strip (Single color/Tunable white/RGB/RGBW/RGB+TW).
- Support 2.4G remote control.
Paramètres #
| Nom du produit | 30A 5 in 1 LED Controller |
| Numéro de modèle. | HP5 |
| Input | DC12V-48V |
| Sortie | 15A/Channel |
| Total output | Max 30A |
| Output Type | Constant voltage |
| Protocol | 2.4GHz |
| Bluetooth Protocol | Bluetooth 5.2 |
| Control distance | 30m (2.4GHz RF) |
| Working temperature | -20~45°C |
| Product Size | 147*75*24.2mm (L*W*H) |
- Indicator
- Input (DC5521 Max 30A)
- Sortie
- SET button
Schéma de connexion #
For single color led strip (short press “SET”–white indicator)
For Tunable white led strip (short press “SET”– yellow indicator)
For RGB led strip (short press “SET”–red indicator)
For RGBW led strip (short press “SET”–green indicator)
For RGB+TW led strip (short press “SET”–blue indicator)
Output mode settings #
Short press (SET) continuously to select output mode, indicator displays different output modes as following diagram.
| Indicator | Sortie |
| White | Single color |
| Yellow | Tunable white |
| Red | RGB |
| Green | RGBW |
| Blue | RGB+TW |
2.4G Remote Control #
Linking code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 3 times within 3 seconds
Link is done if the light flashes 3 times slowly
Cleaning Code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 5 times within 3 seconds
Cleaning code is done if the light flashes 6 times quickly.
Dynamic Mode List (For remote control only) #
Attention: brightness, saturation and speed are dimmable
| No. | Dynamic mode |
| 1 | Automatical color changing |
| 2 | RGB gradual changing |
| 3 | Color changing randomly |
| 4 | Seven color jumping |
| 5 | Color jumping randomly |
| 6 | Volcano red |
| 7 | Forest green |
| 8 | Ocean blue |
9 | Three color jumping and gradual changing |
PUSH dimming #
Power On/off: Short press the button.
Switch Mode(Double click):
Color temperature mode: Change mode between
brightness and color temperature.
RGB mode: Change mode between brightness and RGB.
Adjust brightness/color temperature/RGB:
Long press to increase the value, Release and long
press again to decrease it.
Note: The system recover to brightness mode
automatically if stopping operation after 5 seconds.
Attention #
- Please cut off power before wiring device.
- Please check the voltage of power adapter before connecting.
- Don’t disassemble it if you are not expert.
- Don’t use it in metallic or magnetic area.
