Kenmerken #
- Accord with DMX standard protocol.
- Digital Display, Set DMX initial address through button.
- Support RDM function.
- 16 million colors to change, color temperature and brightness adjustable.
- IP65 waterproof rate
Parameters #
| Modelnr. | FL50-D | FL100-D | FL200-D |
| Ingangsspanning | AC100-240V | AC100-240V | |
| Nominale stroom (max.) | 0.56A | 1.1A | 2.1A |
| Vermogen | 50W | 100W | 200 W |
| Stroomverbruik in stand-by | 0,5 W | ||
| PF | >0.9 | ||
| CRI | >80 | ||
| Kleurtemperatuur | 2700K-6500K | ||
| Lichtstroom | 4800LM | 10000LM | 18.400 LM |
| Lichtrendement | 96LM/W | 100LM/W | 90 LM/W |
| Verlichtingsafstand | 25m | 35m | 50m |
| Stralingshoek | 160° | ||
| Communication Protocol | DMX512, DMX512 (1990),DMX512-A,RDM V1.0 (E1.20-2006 ESTA standard) | ||
| DMX Address | Occupy 5 DMX Address | ||
| Waterdichtheidsklasse | IP65 | ||
| Bedrijfstemperatuur | -20 tot 45 °C | ||
| Materiaal van de lampbehuizing | Gegoten aluminium + gehard glas | ||
Aansluitschema #
Let op
1. If the DMX Floodlight is over 32pcs, or using the super long signal cable, you need DMX signal amplifier. Amplify signal cannot be over 5 times.
2. Please cut off power before wiring device.
3. Please check the voltage of power before connecting.
4. It’s high voltage product which need to wire ground line.
DMX initial address setting #
Let op
Get into locking state when there is no operation over 30 seconds,digital display with low light.
Digital Display status description #
Address always ON: DMX signal valid.
Address flickering: DMX signal invalid.
Let op #
1. The lighting fixtures will be heating on working, please do not cover the lighting housing.
2. Don’t disassemble it if you are not expert.
3. Please do not install the devices on low-lying and easy inundated area.
