Kenmerken #
- This product is made by 2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss
- Support 2.4G remote control
- 16 Millions color / Color temperature / Brightness / saturation dimmable
- Support DND mode
Parameters #
| Modelnr. | FL50 | FL100 | FL200 |
| Ingangsspanning | AC100-240V | AC 200–240 V | |
| Nominale stroom (max.) | 0.56A | 1.1A | 2.1A |
| Vermogen | 50W | 100W | 200 W |
| Stroomverbruik in stand-by | 0,5 W | ||
| PF | >0.9 | ||
| CRI | >80 | ||
| Kleurtemperatuur | 2700K-6500K | ||
| Lichtstroom | 4800LM | 10000LM | 18.400 LM |
| Lichtrendement | 96LM/W | 100LM/W | 90 LM/W |
| Verlichtingsafstand | 25m | 35m | 50m |
| Stralingshoek | 160° | ||
| RF | 2,4GHz | ||
| Regelafstand | 30m | ||
| Bedrijfstemperatuur | -20 tot 45 °C | ||
| Materiaal van de lampbehuizing | Gegoten aluminium + gehard glas | ||
Aansluitschema #
Let op
1. Please cut off power before wiring device.
2. Please check the voltage of power before connecting.
3. It’s high voltage product which need to wire ground line.
Linking Code #
1. Power off
2. Turn on the light after 10 seconds
3. Short press “ I ” 3 times within 3 seconds
Linking code is done if the lights flashes 3 times slowly.
Don’t use “Master ON” to link code. You only can link lights into one zone on one remote.
Cleaning Code #
1. Power off
2. Turn on the light after 10 seconds
3. Short press “ I ” 5 times within 3 seconds
Cleaning code is done if the lights flashes 6 times quickly.
Dynamic Mode List #
Let op: helderheid, verzadiging en snelheid zijn instelbaar
| Nee. | Dynamische modus |
| 1 | Automatische kleurwisseling |
| 2 | RGB geleidelijke verandering |
| 3 | De kleur verandert willekeurig |
| 4 | Zeven kleuren springen |
| 5 | De kleur verandert willekeurig |
| 6 | Vulkaanrood |
| 7 | Bosgroen |
| 8 | Oceaanblauw |
9 | Driekleurig springen en geleidelijke overgang |
Mini Brightness #
- Long press “
” or “ 
” 6S in any group zones until lighting fixture flashes one time (step out automatically if remote don’t be operated within 5S). - Short press “ ” or “ ” in group zone to set up 10 kinds of brightness level ( 1%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 50%).
Short press any button except “OFF” to confirm or step out setting, the master “OFF”can set up all features.
ON/OFF Time #
The light status changes gradually (factory default time is 0.5s).
1.5s: Short press “ON” 1 times and short press “OFF” 5 times within 3 seconds, the setting is done once light flashes 2 times slowly.
0.5s: Short press “OFF” 1 times and short press “ON” 5 times within 3 seconds, the setting is done once light flashes 2 times quickly.
Let op #
- The lighting fixtures will be heating on working, please do not cover the lighting housing.
- Demonteer het apparaat niet als u hier geen ervaring mee hebt.
- Gebruik het niet in een omgeving met metaal of magnetische velden.
