APP download #
Features #
- Adopted standard Zigbee 3.0 protocol.
- 2 kinds of output mode support 2 LED strip (Single color / Tunable white).
- Support 2.4G remote control.
- Support ” Tuya ” App control (Zigbee 3.0 gateway is required)
- Amazon Alexa, Philips Hue, Yandex Stetion, Home Assistant control.
Paramètres #
| Nom du produit | 2 in 1 LED Controller (Zigbee 3.0+2.4G) |
| Numéro de modèle. | iL2Z |
| Input | DC12V-24V |
| Sortie | 6A/Channel |
| Total output | Max 12A |
| Output Type | Constant voltage |
| Protocol | Zigbee 3.0 + 2.4G RF |
| 2.4GHz RF distance | 30m |
| Zigbee distance | 100m |
| Working temperature | -20~45°C |
| Product Size | 91*37*17.6mm (L*W*H) |
- Input 1
- Input 2 (DC5521 Max 10A)
- Indicator
- SET button
- Sortie
Schéma de connexion #
Pour bande LED unicolore (short press “SET”–White indicator)
Input:DC12V-24V
For tunable white LED strip (short press “SET”–Yellow indicator)
Input:DC12V-24V
PUSH dimming #
Short press push switch: Turn on or turn off light.
Long press push switch: Long press / release and long press again to increase or decrease brightness.
Output mode settings #
| Indicator | Sortie |
| White | Single color |
| Yellow | Tunable white |
Add to Amazon Echo (Alexa) #
Echo with built-in Zigbee
1. Put device into Zigbee pairing mode.
2. Say to Amazon ECHO “Alexa, Discover devices” .
3. Wait for a while to discover device, Voice control is activated.
Add to Philips Hue #
Philips Hue Bridge is required
1. Put device into Zigbee pairing mode.
2. Open “Philips Hue” App to click “SETTINGS” and click “Lights”.
3. Click “+” on the top of right corner.
4. Click “Search”.
5. Click “Start configuration”, Follow the app instruction to complete configuration.
Add to Home Assistant #
Zigbee 3.0 Coordinator is required
1. Put device into Zigbee pairing mode.
2. Open Home Assistant app and go to “Zigbee2MQTT”.
3. Click “Ξ”.
4. Click “Permit join (All)” .
5. Wait for the device to connect.
6. Added successfully.
#
Tuya Zigbee 3.0 gateway is required
1. Put device into Zigbee pairing mode.
2. Open “Tuya” APP to click Zigbee gateway, then click “Zigbee”.
3. Click “Add device”.
4. Added successfully.
2.4G Remote Control #
Linking code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 3 times within 3 seconds
Link is done if the light flashes 3 times slowly
Cleaning Code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 5 times within 3 seconds
Cleaning code is done if the light flashes 6 times quickly.
Attention #
- Please cut off power before wiring device.
- Please check the voltage of power adapter before connecting.
- Don’t disassemble it if you are not expert.
- Don’t use it in metallic or magnetic area.
