View Categories

XL2W kézikönyv

PDF

ALKALMAZÁS letöltése #

Olvassa be a QR-kódot, vagy kattintson a gombra a letöltéshez “Tuya Smart” alkalmazás

Tuya okosalkalmazás
Kattintson a Letöltés gombra

Jellemzők #

  • This product is made by WiFi+BLE+2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss. 
  • Dual WiFi+BLE chip improves user to enter into network conveniently. User can pair device into network via bluetooth connection if the router is offline.
  • 2 kinds of output mode support 2 LED strip (Single color/Tunable white).
  • Support 2.4G remote control.
  • Working with “Tuya Smart” app,wireless dimming, remote control, group control, create favourite scene,timmer function, music rhythm, biological rhythm, sleeping and weak up plan, automation and tap to run function.

Paraméterek #

Termék neve2 az 1-ben LED-vezérlő (WiFi+2,4 GHz)
Modellszám.XL2W
InputDC12V-48V
KimenetMax. 12 A
ProtocolWiFi+2,4 GHz
WiFi standardIEEE 802.11b/g/n 2,4 GHz
Ellenőrzési távolság30m (2.4GHz RF)
Üzemi hőmérséklet-20–45 °C
Termék mérete91*37*17.6mm (L*W*H)
iL Controller Size
  1. Input 1
  2. Input 2 (DC5521 Max 10A)
  3. Indicator
  4. SET button
  5. Kimenet
iL Controller Description

Csatlakozási rajz #

For single color LED strip (short press “SET”–red indicator)

Input:DC12V-48V

For tunable white LED strip (short press “SET”–green indicator)

Input:DC12V-48V

PUSH dimming #

Short press push switch: Turn on or turn off light.
Hosszú nyomású kapcsoló: Long press / release and long press again to increase or decrease brightness.

ALKALMAZÁS RÉSZLETEI #

Adding device #

iL1W Input

1). Connect controller with power adapter

iL1W Long Press Set

2). Indicator blinks quickly ( 2 times per seconds), long press “SET” 3 seconds if indicator doesn’t blink quickly

2.4G WiFi

3). Connect smart phone with 2.4Ghz WiFi

Click the "+" in the upper right corner

4). Click “+”

Select lighting

5). select “lighting” and “light source (BLE+wifi)”, finishing the rest steps in app

6). Click device to enter into main page

  1. Brightness: quickly change brightness
  2. PWM frequency: changing different frequency to solve the noise problem from power adapter. 
  3. Mini brightness: the lowest brightness of lights.
  4. ON/OFF time: the light status changes gradually( factory default time is 0.5s).

High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. (Factory default PWM frequency is 4KHz).

Voice control Details #

Click “Me”, select the third-party service and completed setting.

Third-Party Services

2.4G távirányító #

Linkelő kód (2 különböző megoldás) #

Controller Link

Solution 1
Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds

Controller Unlink

Solution 2
Power off and power on, short press “ I ” 3 times within 3 seconds

  Link is done if the light flashes 3 times slowly

Tisztítókód (2 különböző megoldás) #

Controller Link

Solution 1
Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds

Solution 2
Power off and power on, short press “ I ” 5 times within 3 seconds

Cleaning code is done if the light flashes 6 times quickly.

Figyelem #

  1. Kérjük, kapcsolja ki a készüléket a kábelezés előtt.
  2. Please check the voltage of power adapter before connecting.
  3. Ne szedd szét, ha nem vagy hozzáértő.
  4. Ne használja fémes vagy mágneses területen.
Scroll to Top