Funkcje #
- This product is made by 2.4G wireless transmitting technology with low consumption and strong ability
- 2 kinds of output mode support 2 led strip (Single color/Tunable white).
- Support 2.4G remote control.
Parametry #
| Product Name | 30A 2 in 1 LED Controller |
| Nr modelu. | HP2 |
| Input | DC12V-48V |
| Output | 15A/Channel |
| Total output | Max 30A |
| Output Type | Constant voltage |
| Protocol | 2,4 GHz |
| Bluetooth Protocol | Bluetooth 5.2 |
| Odległość sterowania | 30m (2.4GHz RF) |
| Working temperature | -20~45°C |
| Product Size | 147*75*24.2mm (L*W*H) |
- Indicator
- Input (DC5521 Max 30A)
- Output
- SET button
Schemat połączeń #
For single color led strip (short press “SET”–white indicator)
For Tunable white led strip (short press “SET”– yellow indicator)
For RGB led strip (short press “SET”–red indicator)
Output mode settings #
| Indicator | Output |
| White | Single color |
| Yellow | Tunable white |
2.4G Remote Control #
Linking code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 3 times within 3 seconds
Link is done if the light flashes 3 times slowly
Cleaning Code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 5 times within 3 seconds
Cleaning code is done if the light flashes 6 times quickly.
PUSH dimming #
Power On/off: Short press the button.
Switch Mode(Double click):
Color temperature mode: Change mode between
brightness and color temperature.
Adjust brightness/color temperature:
Long press to increase the value, Release and long
press again to decrease it.
Note: The system recover to brightness mode
automatically if stopping operation after 5 seconds.
Uwaga #
- Please cut off power before wiring device.
- Please check the voltage of power adapter before connecting.
- Nie należy go rozmontowywać, jeśli nie jest się ekspertem.
- Nie należy używać tego urządzenia w miejscach, gdzie występują pola magnetyczne lub w otoczeniu metali.
