iH5W & iM5W Manual

APP download #

Scan QR code or click button to download “Tuya Smart” app

Click Download

Features #

• This product is made by WiFi+BLE+2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss.
• Dual WiFi+BLE chip improves user to enter into network conveniently. User can pair device into network via bluetooth connection if the router is offline.
• 5 kinds of output mode support 5 LED strip (single color / CCT / RGB / RGBW / RGB+CCT).
• Support 2.4G remote control.
• Working with “Tuya Smart”app, wireless dimming, remote control, group control, create favourite scene, timmer function, music rhythm, biological rhythm, sleeping and weak up plan, automation and tap to run function.

Parameters #

1. Input 1

2. Input 2 (DC5521 Max 10A) 

3. Indicator

4. SET button

5. Output

Connection Diagram #

For single color led strip (short press “SET”–white indicator)

For dual white led strip (short press “SET”– yellow indicator)

For RGB led strip (short press “SET”–red indicator)

For RGBW led strip (short press “SET”–green indicator)

For RGB+CCT led strip (short press “SET”–blue indicator)

Output mode settings #

Short press (SET) continuously to select output mode, indicator displays different output modes as following diagram.

APP Details #

Adding device #

1). Connect controller with power adapter

2). Indicator blinks quickly ( 2 times per seconds), long press “SET” 3 seconds if indicator doesn’t blink quickly

3). Connect smart phone with 2.4Ghz WiFi

4). Click “+”

5). select “lighting” and “light source (BLE+wifi)”, finishing the rest steps in app

6). Click device to enter into main page

Parameter definition #

1. Output mode: select correct mode to compatible with led strip.
2. PWM frequency: changing different frequency to solve the noise problem from power adapter. 
3. Mini brightness: the lowest brightness of lights.
4. ON/OFF time: the light status changes gradually( factory default time is 0.5s).

High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. (Factory default PWM frequency is 4KHz).

Voice control Details #

Click “Me” to add device (controller must be paired with wifi completely)

2.4G Remote Control #

Linking code (2 different solution) #

Solution 1 #

Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds

Solution 2 #

Power off and power on, short press “ I ” 3 times within 3 seconds

  Link is done if the light flashes 3 times slowly

Cleaning Code (2 different solution) #

Solution 1 #

Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds

Solution 2 #

Power off and power on, short press “ I ” 5 times within 3 seconds

Cleaning code is done if the light flashes 6 times quickly.

Dynamic Mode List (For remote control only) #

Attention #

1. Please cut off power before wiring device
2. Please check the voltage of power adapter before connecting
3. Don’t disassemble it if you are not expert
4. Don’t use it in metallic or magnetic area