Features #
- Color temperature / Brightness dimmable
- 2.4G RF wireless transmission technology
- Control distance 30m
- 4 Zones individual control, countless lights in each zone
- Support to save 4 scenes
Parameters #
| Product Name | 4-Zone CCT Panel Remote (2.4G) |
| Model No. | PR01 / PR01B |
| Battery | 3V (CR2032*2PCS) |
| Standby Power Consumption | 8μA |
| Transmitting Power | 6dBm |
| RF | 2.4GHz |
| Control distance | 30m |
| Working temperature | -20~45°C |
| Product Size | 86*86*12.5mm (L*W*H) |
Battery Installation #
User need to buy battery separately, please pay attention to battery “ + ” and “ – ”
Magnetic Base Holder Installation #
- Remove the back sticker and stick it on smooth wall.
- Please ensure that the wall is clean without any dirty or oil impurities.
Key Description #
Short Press: ON/OFF
Long Press: Turn off light
Long Press 2S: Activate night light mode
Indicator status:
ON: Current zone is selected
Indicator Flashing: The light is OFF
Short press: Activate scenes
Long press: Save scenes
Linking Code #
1. Power off
2. Turn on the light after 10 seconds
3. Short press “ 
” 3 times within 3 seconds
Linking code is done if the lights flashes 3 times slowly.
Don’t use “ All ” to link code. You only can link lights into one zone on one remote.
Linking Code #
1. Power off
2. Turn on the light after 10 seconds
3. Short press “ ” 5 times within 3 seconds
Cleaning code is done if the lights flashes 6 times quickly.
Don’t use “ All ” to Cleaning code.
Brightness / CCT Control #
Short press “ 
” to switch between CCT / brightness mode.
Indicator fixed while dimming brightness
Indicator flashing while dimming CCT
Copying Function #
The remote have copying function. It can copy linking data from other remote. Users don’t need to link current remote if copying data successfully.
1. Activate copying function:
Press ” 
” 10 times continuously
2. Press any button from another remote to finish copying.
Attention: Copying is done if indicator flashes 3 times slowly.
Clean Copying #
Press ” ” continuously 15 times until indicator flashes 6 times.
Time Setting (ON/OFF light) #
0.5S: Press ” 
” 10 times continuously until the light flashes 2 times.
1.5S: Press ” ” 15 times continuously until the light flashes 2 times.
DND Mode ( ON/OFF) #
ON: Press ” 
” 10 times continuously until the light flashes 4 times quickly.
OFF: Press ” ” 15 times continuously until the light flashes 4 times slowly.
PWM Frequency (High/Low) #
High: Press ” 
” 10 times continuously until the light flashes 1 times.
Low: Press” ” 15 times continuously until the light flashes 1 times.
Attention: The different frequency can avoid the beeping noise from mains.
Mini Brightness #
- Long press ”
” 3S until indicator is flashing (step out automatically if remote don’t be operated within 5S). - Short press ” ” to set up 10 different levels (1%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%). Press any button to step out.
Lock CCT Slider #
Press” ” 15 times continuously until the indicator flashes 6 times.
Lock CCT and Brightness Slider #
Press” ” 20 times continuously until the indicator flashes 3 times slowly.
Release Locking #
Press” ” 10 times continuously until the indicator flashes 3 times.
Key Tone ( ON/OFF) #
OFF: Long press ” All ” until the key tone is OFF.
ON: Long press ” All ” until the key tone is ON.
Attention #
- Pay attention to battery “ + ” and “ – ” while doing installation.
- It’s better to remove battery if you don’t use remote frequently.
- Don’t use remote near metal or magnetic area.
