Categorieën bekijken

Handleiding voor iH1 en iM1

Kenmerken #

  • This product is made by 2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss.
  • Ondersteunt afstandsbediening op 2,4 GHz.

Parameters #

Modelnr.iH1iM1
Productnaam2.4G Single Color LED Controller (20A)2.4G Single Color LED Controller (12A)
InvoerDC12V-48V12 V DC - 24 V DC
Uitvoer20A/Channel12A/Channel
Totale productieMax 20AMax. 12 A
RF2,4GHz2,4GHz
Control distance30m30m
Bedrijfstemperatuur-20 tot 45 °C-20 tot 45 °C
Product Grootte110*39*20mm (L*W*H)91*38.5*17mm (L*W*H)
iH series size diagram
led controller dimensions diagram
led-control-diagram

  1. Invoer 1

  2. Ingang 2 (DC5521, max. 10 A) 

  3. Indicator

  4. SET-knop

  5. Uitvoer

Aansluitschema #

PUSH dimming #

Short press push switch: Turn on or turn off light.
Long press push switch: Long press / release and long press again to increase or decrease brightness.

Setting PWM frequency #

Long press “SET”until indicator flashes, short press “SET” continuously to select PWM frequency.

Lowest Flashing slowlyFlashing quicklyFastest
250Hz2KHz4KHz8KHz

PWM frequency (changing different frequency to solve the noise problem from power adapter).

  High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. Factory default PWM frequency is 4KHz.

2,4 GHz-afstandsbediening #

Code koppelen (2 verschillende oplossingen) #

Link
Oplossing 1 #

Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds

Link
Oplossing 2 #

Power off and power on, short press “ I ” 3 times within 3 seconds

  De verbinding is tot stand gebracht als het lampje 3 keer langzaam knippert

Schoonmaakcode (2 verschillende oplossingen) #

Unlink
Oplossing 1 #

Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds

Unlink
Oplossing 2 #

Power off and power on, short press “ I ” 5 times within 3 seconds

De reinigingscode is voltooid als het lampje 6 keer snel knippert.

Mini Brightness #

  1. Long press “ ” or “ ” 6S in any group zones until lighting fixture flashes one time (step out automatically if remote don’t be operated within 5S).
  2. Short press “  ” or “  ” in group zone to set up 10 kinds of brightness level ( 1%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 50%).

  Short press any button except “OFF” to confirm or step out setting, the master “OFF”can set up all features.

ON/OFF Time #

The light status changes gradually (factory default time is 0.5s).

1.5s: Short press “ON” 1 times and short press “OFF” 5 times within 3 seconds, the setting is done once light flashes 2 times slowly.

0.5s: Short press “OFF” 1 times and short press “ON” 5 times within 3 seconds, the setting is done once light flashes 2 times quickly.

Let op #

  1. Please cut off power before wiring device
  2. Please check the voltage of power adapter before connecting
  3. Don’t disassemble it if you are not expert
  4. Don’t use it in metallic or magnetic area
PDF

[gtranslate]

Scroll naar boven