Kenmerken #
- This product is made by 2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss.
- 2 kinds of output mode support 2 LED strip (Single color/Tunable white).
- Ondersteunt afstandsbediening op 2,4 GHz.
Parameters #
| Modelnr. | iH2 | iM2 |
| Productnaam | 2.4G 2 in 1 LED Controller (20A) | 2.4G 2 in 1 LED Controller (12A) |
| Invoer | DC12V-48V | 12 V DC - 24 V DC |
| Uitvoer | 8A/Channel | 6 A/kanaal |
| Totale productie | Max 20A | Max. 12 A |
| RF | 2,4GHz | 2,4GHz |
| Control distance | 30m | 30m |
| Bedrijfstemperatuur | -20 tot 45 °C | -20 tot 45 °C |
| Product Grootte | 110*39*20mm (L*W*H) | 91*38.5*17mm (L*W*H) |
Invoer 1
Ingang 2 (DC5521, max. 10 A)
Indicator
SET-knop
Uitvoer
Aansluitschema #
For single color LED strip (short press “SET”–White indicator)
For tunable white LED strip (short press “SET”-Yellow indicator)
PUSH dimming #
Short press push switch: Turn on or turn off light.
Long press push switch: Long press / release and long press again to increase or decrease brightness.
Setting PWM frequency #
Long press “SET”until indicator flashes, short press “SET” continuously to select PWM frequency.
| Lowest | Flashing slowly | Flashing quickly | Fastest |
| 250Hz | 1KHz | 4KHz | 8KHz |
PWM frequency (changing different frequency to solve the noise problem from power adapter).
High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. Factory default PWM frequency is 4KHz.
2,4 GHz-afstandsbediening #
Code koppelen (2 verschillende oplossingen) #
Oplossing 1
Druk één keer kort op “SET” en druk binnen 3 seconden drie keer kort op “I”
Oplossing 2
Schakel het apparaat uit en weer in, en druk binnen 3 seconden 3 keer kort op de toets “I”
De verbinding is tot stand gebracht als het lampje 3 keer langzaam knippert
Schoonmaakcode (2 verschillende oplossingen) #
Oplossing 1
Druk 1 keer kort op “SET” en druk binnen 3 seconden 5 keer kort op “I”
Oplossing 2
Schakel het apparaat uit en weer in, en druk binnen 3 seconden 5 keer kort op de toets “I”
De reinigingscode is voltooid als het lampje 6 keer snel knippert.
Mini Brightness #
- Long press “
” or “ 
” 6S in any group zones until lighting fixture flashes one time (step out automatically if remote don’t be operated within 5S). - Short press “ ” or “ ” in group zone to set up 10 kinds of brightness level ( 1%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 50%).
Short press any button except “OFF” to confirm or step out setting, the master “OFF”can set up all features.
ON/OFF Time #
The light status changes gradually (factory default time is 0.5s).
1.5s: Short press “ON” 1 times and short press “OFF” 5 times within 3 seconds, the setting is done once light flashes 2 times slowly.
0.5s: Short press “OFF” 1 times and short press “ON” 5 times within 3 seconds, the setting is done once light flashes 2 times quickly.
Let op #
- Please cut off power before wiring device
- Please check the voltage of power adapter before connecting
- Don’t disassemble it if you are not expert
- Don’t use it in metallic or magnetic area
