App downloaden #
Kenmerken #
- This product is made by WiFi+BLE+2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss.
- Dual WiFi+BLE chip improves user to enter into network conveniently. User can pair device into network via bluetooth connection if the router is offline.
- 5 kinds of output mode support 5 LED strip (single color / CCT / RGB / RGBW / RGB+CCT).
- Ondersteunt afstandsbediening op 2,4 GHz.
- Working with “Tuya Smart”app, wireless dimming, remote control, group control, create favourite scene, timmer function, music rhythm, biological rhythm, sleeping and weak up plan, automation and tap to run function.
Parameters #
| Modelnr. | iH5W | iM5W |
| Productnaam | WiFi+2.4G 5 in 1 LED Controller (20A) | WiFi+2.4G 5 in 1 LED Controller (12A) |
| Invoer | 12 V DC - 24 V DC | 12 V DC - 24 V DC |
| Uitvoer | 8A/Channel | 6 A/kanaal |
| Totale productie | Max 20A | Max. 12 A |
| Protocol | WiFi+2.4GHz | WiFi+2.4GHz |
| WiFi standard | IEEE 802.11b/g/n 2.4GHz | IEEE 802.11b/g/n 2.4GHz |
| Control distance | 30m (2.4GHz RF) | 30m (2.4GHz RF) |
| Bedrijfstemperatuur | -20 tot 45 °C | -20 tot 45 °C |
| Product Grootte | 110*39*20mm (L*W*H) | 91*38.5*17mm (L*W*H) |
Invoer 1
Ingang 2 (DC5521, max. 10 A)
Indicator
SET-knop
Uitvoer
Aansluitschema #
For single color led strip (short press “SET”–white indicator)
For dual white led strip (short press “SET”– yellow indicator)
For RGB led strip (short press “SET”–red indicator)
For RGBW led strip (short press “SET”–green indicator)
For RGB+CCT led strip (short press “SET”–blue indicator)
Instellingen voor de uitvoermodus #
Druk kort en herhaaldelijk op (SET) om de uitvoermodus te selecteren; het indicatielampje geeft de verschillende uitvoermodi weer zoals in onderstaande afbeelding.
| Indicator | Uitvoer |
| Wit | Eén kleur |
| Geel | Dual white |
| Rood | RGB |
| Groen | RGBW |
| Blauw | RGB+CCT |
App-details #
Adding device #
1). Connect controller with power adapter
2). Indicator blinks quickly ( 2 times per seconds), long press “SET” 3 seconds if indicator doesn’t blink quickly
3). Connect smart phone with 2.4Ghz WiFi
4). Click “+”
5). select “lighting” and “light source (BLE+wifi)”, finishing the rest steps in app
6). Click device to enter into main page
Parameter definition #
- Output mode: select correct mode to compatible with led strip.
- PWM frequency: changing different frequency to solve the noise problem from power adapter.
- Mini brightness: the lowest brightness of lights.
- ON/OFF time: the light status changes gradually( factory default time is 0.5s).
High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. (Factory default PWM frequency is 4KHz).
Voice control Details #
Click “Me”, select the third-party service and completed setting.
2,4 GHz-afstandsbediening #
Code koppelen (2 verschillende oplossingen) #
Schoonmaakcode (2 verschillende oplossingen) #
Lijst met dynamische modi (alleen voor de afstandsbediening) #
Let op: helderheid, verzadiging en snelheid zijn instelbaar
| Nee. | Dynamische modus |
| 1 | Automatische kleurwisseling |
| 2 | RGB geleidelijke verandering |
| 3 | De kleur verandert willekeurig |
| 4 | Zeven kleuren springen |
| 5 | De kleur verandert willekeurig |
| 6 | Vulkaanrood |
| 7 | Bosgroen |
| 8 | Oceaanblauw |
9 | Driekleurig springen en geleidelijke overgang |
Let op #
- Please cut off power before wiring device
- Please check the voltage of power adapter before connecting
- Don’t disassemble it if you are not expert
- Don’t use it in metallic or magnetic area
