Features #
- This product is made by WiFi+BLE+2.4G wireless transmitting technology with low consumption and strong ability to resist signal loss.
- Dual WiFi+BLE chip improves user to enter into network conveniently.
- 2 kinds of output mode support 2 led strip (Single color/Tunable white).
- Support 2.4G remote control.
- Working with “Tuya Smart” app, wireless dimming, remote control, group control, create favourite scene, timmer function, music rhythm, biological rhythm, sleeping and weak up plan, automation and tap to run function.
Parameters #
| Product Name | 30A 2 in 1 LED Controller (WiFi+2.4G) |
| Model No. | HP2W |
| Input | DC12V-48V |
| Output | 15A/Channel |
| Total output | Max 30A |
| Protocol | WiFi+2.4GHz |
| WiFi standard | IEEE 802.11b/g/n 2.4GHz |
| Bluetooth Protocol | Bluetooth 5.2 |
| Control distance | 30m (2.4GHz RF) |
| Working temperature | -20~45°C |
| Product Size | 147*75*24.2mm (L*W*H) |
- Indicator
- Input (DC5521 Max 30A)
- Output
- SET button
Connection Diagram #
For single color led strip (short press “SET”–white indicator)
For Tunable white led strip (short press “SET”– yellow indicator)
For RGB led strip (short press “SET”–red indicator)
Output mode settings #
| Indicator | Output |
| White | Single color |
| Yellow | Tunable white |
APP Details #
Adding device #
1). Connect controller with power adapter
2). Indicator blinks quickly ( 2 times per seconds), long press “SET” 3 seconds if indicator doesn’t blink quickly
3). Connect smart phone with 2.4Ghz WiFi
4). Click “+”
5). select “lighting” and “light source (BLE+wifi)”, finishing the rest steps in app
6). Click device to enter into main page
- Output mode: select correct mode to compatible with led strip.
- PWM frequency: changing different frequency to solve the noise problem from power adapter.
- Mini brightness: the lowest brightness of lights.
- ON/OFF time: the light status changes gradually( factory default time is 0.5s).
High frequency only support device with lower wattage, low frequency support device with higher wattage and have better dimming performance. (Factory default PWM frequency is 4KHz).
Voice control Details #
Click “Me”, select the third-party service and completed setting.
2.4G Remote Control #
Linking code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 3 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 3 times within 3 seconds
Link is done if the light flashes 3 times slowly
Cleaning Code (2 different solution) #
Solution 1
Short press “SET” 1 time, short press “ I ” 5 times within 3 seconds
Solution 2
Power off and power on, short press “ I ” 5 times within 3 seconds
Cleaning code is done if the light flashes 6 times quickly.
PUSH dimming #
Power On/off: Short press the button.
Switch Mode(Double click):
Color temperature mode: Change mode between
brightness and color temperature.
Adjust brightness/color temperature:
Long press to increase the value, Release and long
press again to decrease it.
Note: The system recover to brightness mode
automatically if stopping operation after 5 seconds.
Attention #
- Please cut off power before wiring device.
- Please check the voltage of power adapter before connecting.
- Don’t disassemble it if you are not expert.
- Don’t use it in metallic or magnetic area.
